Electric Power Tools are portable power tool that is driven by an electric motor. An electric power tool usually consists of a housing and an electric motor, the rotor of which is connected to a spindle or mandrel by means of a sleeve or a reduction gear.
|
|
-
-
-
A handheld power tool with a rotating abrasive disc used for cutting, grinding and polishing the motor drives, a geared head at a right-angle on which is mounted an abrasive disc. These are also known as a side grinder or disc grinder.
-
-
-
A Belt sander is a hand-held tool used to smooth surfaces by abrasion with sandpaper. These uses the rotational power of a motor to move a belt made of sandpaper.
-
A Disc sander is a hand-held power tool used to smooth surfaces by abrasion with sandpaper. These uses circular pieces of sandpaper and spin the sandpaper against the material to smooth it.
-
-
An electrically operated tool with scissor like action used to precise cut fiber cement quickly and easily.
-
An electric chop saw & cut-off machines is a platform mounted power tool used to cut wood, metal and plastic by means of a rotating blade.
-
A circular saw is a power-saw using a toothed or abrasive disc or blade to cut different materials using a rotary motion spinning around an arbor.
-
-
-
-
-
-
Cordless Oscillating Tool or multi tool is powered by mains which is designed to perform a wide range of tasks. They can be used for cutting, sanding, rasping, polishing, scraping and a number of other tasks.
-
-
-
-
Demolition hammer is a tool designed to deliver high torque output with minimal exertion by the user, by storing energy in a rotating mass, then delivering it suddenly to the output shaft, and usually used in demolition works
-
-
-
Electric drill is a hand held AC mains-powered tool fitted with a cutting tool attachment or driving tool attachment, usually a drill bit or driver bit. The attachment is gripped by a chuck at one end of the drill and rotated while pressed against the target material. Used for boring holes in various materials or fastening various materials together with the use of fasteners.
-
-
-
-
These are hand held AC mains-powered drills designed to drill holes into concrete using a hammering action.
-
-
A heat gun is a device used to emit a stream of hot air used for heating a specific area, which can be held by hand.
-
-
An electric power impact wrench with interchangeable toolhead attachments, is a socket wrench tool designed to deliver high torque output with minimal exertion by the user, by storing energy in a rotating mass, then delivering it suddenly to the output shaft. Used for installing and removing nuts, bolts, and screws.
-
These are the power tool saws used for cutting arbitrary curves, such as stenciled designs or other custom shapes, into a piece of wood or similar material. It is usually used in a more artistic fashion than other saws, which only cut in straight lines and exist mainly to cut pieces and enable the cutting of materials that other blades are unable to reach.
-
-
A laminate trimmer is a small version of a wood router, normally used to trim laminate such as Formica.
-
A masonry saw (often known as a consaw or road saw) is a power tool used for cutting concrete, masonry, brick, asphalt, tile, and other solid materials.
-
-
-
A electric nibbler is a power tool for cutting sheet metal with minimal distortion.
-
-
A electric polishers are the machine having a powered abrasive-covered disk or belt, used for smoothing or polishing surfaces. Electric buffers are the one that buffs, especially a piece of soft leather or cloth used to shine or polish.
-
A bandsaw is a power tool which uses a blade consisting of a continuous band of metal with teeth along one edge to cut various workpieces.
-
-
A power miter saw, also known as a drop saw, is a power tool used to make a quick, accurate crosscut in a workpiece at a selected angle.
-
-
-
A electric reciprocating saw is a type of power saw in which the cutting action is achieved through a push and pull reciprocating motion of the blade.
-
Rotary Hammers are the electric boring tool that rotates with percussive action and cuts very hard materials.
-
-
A router is a tool used to rout out (hollow out) an area in the face of a relatively hard workpiece, typically of wood or plastic. The main application of routers is in woodworking, especially cabinetry. The router is most commonly used as a plunging tool and also inverted in a router table.
-
A sander can be a hand-held power tool used to smooth surfaces by abrasion with sandpaper.
-
-
-
-
A power driven hand held tool, designed to impart rotary motion to a screwdriver bit and is used for installing and removing screws.
-
An electrically operated tool with scissor like action used to make a very precise cut.
-
A spiral saw is a type of powered saw used for making accurate cuts without the need for a pilot hole in wallboard, plywood, or another thin, solid material.
-
A track saw is a type of powered saw used for making long, precise cuts faster and better than table saws and circular saws. They are light and portable, don't need clamps and set up quickly and accurately.
-
-
-
-
A die grinder, also known as a rotary tool, is a handheld power tool used for grinding, sanding, honing, polishing, or machining material (typically metal, but also plastic or wood).
|
() Cart
