Tools recquired to cut or enlarge a hole of circular cross-section in solid materials for many different applications.
|
|
-
Jobber length drills that are made to NAS aerospace specifications for drilling in tough, high-tensile strength materials like stainless steel and titanium.
-
-
An annular cutter (also called as core drill, core cutter, broach cutter, Trepanning drill or cup-type cutter) is a hollow, multiple cutting edges cutting tool, used to make/drill holes in ferrous and non-ferrous metals.
-
These bits are extra long, flexible steel shaft permits drilling between and behind walls and provides pull-through holes in both ends for easy installation of small wire systems.
-
-
-
The combined drill and countersink are used in metalworking to provide a starting hole for a larger-sized drill bit or to make a conical indentation in the end of a workpiece in which to mount a lathe center.
-
A core drill is a drill specifically designed to remove a cylinder of material, much like a hole saw. The material left inside the drill bit is referred to as the core.
-
Double End Drill bits are cutting tools used to create holes and its double end allows twice the usage.
-
-
Combination of variety of drill bit and countersink sizes organized together.
-
A set of accessories and spare items which is related to Drill like drill angle attachments, drill bit adapters, drill stops etc.
-
Combination of variety of drill bit sizes organized together.
-
-
-
-
A drill attachment used with a standard bit to increase the drill's reach.
-
Milling cutters used for drilling operations.
-
-
Holds the drill bit securely. Also the system allows a wide range of taper drill bits to be used in many machines by just changing the drill holder, hence the need to carry a different set of expensive bits for each machine is unnecessary.
-
Most commonly used for drilling deep holes and also drilling areas that are difficult to reach.
-
These are custom designed drills used in special applications like drilling through mirrors, glass, ceramic and porcelain tile. Glass and ceramic tile drill used to drill relief holes for bathroom installations, fastening mirrors and setting screw anchors.
-
Hammer Drill Bit is a Cutting tool designed for drilling into masonry materials like Brick, Block and Concrete.
-
Hex shank drill bits feature hexagonal shank design that helps provide added power, improved torque and quick bit changes. The hexagonal shape allows the drill bit to be used in both mandrel chucks and screwdriver bit chucks without slipping.
-
High performance drills are manufactured to meet the tough demands of production level manufacturing. These drills offer long tool life, can be operated at high speeds, provide excellent chip control and leave a smooth surface finish.
-
-
Hole cutter is a tool of annular shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. Used for quickly and accurate cutting holes into variety of materials.
-
A set of accessories and spare items which is used for hole saw such as bit, adapter, Extension etc.
-
A kit consisting of variety of sizes, shank types, material grades and applications of hole saws.
-
A hole saw is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill.
-
Also known as standard length drills, they are the most popular and widely used lengths that can be used in portable and machine drilling. The length of the flutes is between nine and fourteen times the diameter of the drill, depending on the drill size.
-
-
A masonry drill is used to make holes in concrete and other hard, brittle materials. Drilling holes into masonry requires the proper drilling tool, a high-quality drill bit, and some operator technique.
-
Mechanics Drills also known as maintenance or car length drills, these drills have a slightly shorter flute and overall length with increased strength and overall rigidity. Used to increase holemaking productivity on metal, concrete, wood and in more demanding drilling applications.
-
Micro drills refers to the drilling of holes less than 0.5 mm (0.020 in).
-
-
Pilot Point Drill bits have a unique point on them that allows them to start on contact for clean accurate holes and reduced lock-up on breakthrough. It is ideal for drilling through a variety of materials from wood and acrylic to metal and more.
-
Reduced shank drills features a smaller diameter at the shank than at the tip, which allows a larger hole to be drilled using cutting tools with smaller chuck sizes. It provide excellent results on machining applications that require a drill bit with high strength and rigidity.
-
-
A set consisting of different types and sizes of Screw Extractors which is a tool used for removing broken or seized screws, other than by drilling, with highly tapered thread structure.
-
Screw extractor is a tool used expressly for removing broken or seized screws, for rapid removal of sunken, broken screws or studs.
-
Screw Machine Length Drills were developed for screw machine operations where regular length drills were too long. The short length design reduces breakage and runout. They are now used in portable drilling where short, rigid drills are a requirement and are especially suitable for N/C drilling applications.
-
Short-length or stub length (stubby), drills that have shorter flute and overall lengths that provides maximum strength and rigidity which is perfect for portable (hand) and machine drilling.
-
Silver and Deming drills are all purpose drills and are used wherever the maximum chuck capacity is 1/2". They are also called S&D Drills, Blacksmith Drills or Prentice Drills (Canada).
-
Spade blade holders can accommodate an array of blade sizes.
-
A drill with a wide blade at the tip. The width of the blade often exceeds the diameter of the drill.
-
Custom designed drills used in special applications.
-
Designed to provide a starting hole for larger diameter drill bits. And also to make a conical indentation in the end of a workpiece in which to mount a lathe center.
-
A special drill bit used to drill out weld spots on sheet metal material without damaging the panels.
-
A step drill bit is a drill bit that has the tip ground down to a different diameter. The transition between ground diameter and the original diameter is either straight, to form a counterbore, or angled, to form a countersink.
-
-
General purpose drills with increased cutting length have taper flute.
-
Taper shank drills are general purpose drills with increased cutting length. They are manufactured with a Morse Taper Shank.
-
-
Threaded Shank Drills help ensure precision hole-drilling in confined and tough-to-reach areas.
-
A set of wood drill bits with various sizes and/or lengths which is optimized for drilling in wood.
-
Wood Drill Bit is a drill bit which is optimized for drilling in wood.
|
() Cart
